SAFETY PREVENTION

• Make sure that everyone working with CRACKING-AG understands the possibility of     blowouts, and has read the technical instructions thoroughly.

• CRACKING-AG is a highly alkaline product, its pH reaches 13 after contact with water     and can cause severe irritation to mucous membranes, especially eyes. Skin and eye     contact with contacts with CRACKING-AG must be rinsed off with large amounts of cold     water immediately without rubbing. Consult a doctor quickly.

• Wear safety goggles and rubber gloves during CRACKING-AG handling, mixing and     filling. Dust-proof mask is recommended in poorly ventilated areas such as tunnels or     mines.

• Do not get your face close to or stand near the filled holes for at least 3 hours after     filling completion.

• Warm or bubbling mortar is forbidden to fill into holes. Once filled holes start to     smoke or steam, that is the sign they may be about to blow out. Clear the area of     people immediately.

• Keep people away from jobsite after filling holes. In case that people have to remain     in the area, cover filled holes with a tarpaulin.

• Take care of fall of cracked block from the cracking object.

Always wear Safety Goggles when working with CRACKING-AG.

 Keep CRACKING-AG out of reach of children.